Page MenuHomePhabricator

Channel delay "reset" sets to wrong value
Closed, ResolvedPublic

Description

When bringing up the popup for a channel delay value, ranging from 0.3ms to 500ms (on the X32/M32), the "reset" arrow button changes the value to the middle of the two values, which is 250.2ms.

In other words, the "reset" arrow doesn't know that the default value is 0.3ms, which is the minimum. It's treating it like a -100 to +100 pan, where 0 is the default because it's in the middle.

Platform: iOS
Variant: XM32
Version: 1.4.2

Event Timeline

Yes by default all values are reset to 0.5 if not defined otherwise, which is the case for the delay time.
I'll adjust it in the next release

{{userId:1}}

AnonymousTaskBot mentioned this in v1.2.2.
AnonymousTaskBot mentioned this in v1.4.3.
AnonymousTaskBot mentioned this in v1.1.2.
AnonymousTaskBot mentioned this in v1.2.2.
AnonymousTaskBot mentioned this in v1.2.2.
AnonymousTaskBot mentioned this in v1.2.2.
AnonymousTaskBot mentioned this in v1.2.2.
AnonymousTaskBot mentioned this in v1.2.2.
AnonymousTaskBot mentioned this in v1.2.2.