The X32 can't send post fader meters for multiple input channels at once.
Mon, Jun 18
Sun, Jun 17
I could not reproduce this issue. Can you send me your layer configuration?
Mon, Jun 4
Yes, every device in a network needs it's own IP address in the same subnet.
Please consule the manual of the mixer for more information
The first chars in preset slot 100 contain the access configuration, and do not belong to the password.
You can always delete this entry to disable the password
Sat, Jun 2
Fri, Jun 1
Wed, May 30
Mon, May 28
May 23 2018
Can't reproduce, might be a device settings related issue
May 22 2018
May 18 2018
From a usability perspective I suppose turning all sends off makes more sense. I'll add this feature
May 17 2018
May 16 2018
Ok, I understand. The X32 edit (mac) behaves the same. But when doing it from X32mix (iPad) it turns all “sends” to “off”.
This is related to the mixer itself. It uses the "on" value of the send. Therefore every send stays enabled if you change the tap to "sub group"
May 13 2018
May 11 2018
Will be fixed with the next update
May 6 2018
Of course! I use Lenovo pads, I’ve tried this on all three with the same result.
Not sure yet if this a bug in android or the app. Still need some more devices to test it.
Will be added with the next update
May 3 2018
May 2 2018
Apr 27 2018
Bugs and misses have been resolved, whishlist still open
Apr 26 2018
Apr 24 2018
Apr 14 2018
Apr 9 2018
Apr 7 2018
Apr 4 2018
Apr 3 2018
Mute enable not set?
Apr 2 2018
Latest version has moved a step closer with the layout/layer save screen update.
Mar 31 2018
Mar 27 2018
Mar 25 2018
This is a hard limit due to the processing power.
Mar 24 2018
Possible with custom layouts
Possible with midi but other devices require a custom driver
Behavior is correct but adding a post fader meter would be possible
Mar 23 2018
I have needed this feature before as well.
Not possible due to protocol limitations
Mar 22 2018
Mar 19 2018
the app does already provide this functionality.
Mar 18 2018
Before I get to my comments; this program is fantastic! Thank you for writing it. I wish there was a PC app with this quality of work!
Mar 15 2018
Mar 12 2018
Mar 10 2018
Mar 9 2018
Mar 7 2018
Mar 4 2018
Mar 2 2018
Feb 24 2018
Feb 16 2018
Feb 12 2018
Yes, it was intended that multiple layouts can be added but I postponed it since other tasks became more important. It is planned to add this feature sooner or later.
Feb 11 2018
Feb 5 2018
Accessing these faders is not possible via network
Looks good. I'll take a look at it
Jan 30 2018
Jan 24 2018
These features have already been requested.
Wifi related issue - the X32 uses UDP as network protocol which can loose packets
Jan 23 2018
Jan 22 2018
Jan 21 2018
If the channels are muted, it doesn't matter if phantom is on or off.
Therefore switching phantom globally off would not make that much sense in my opinion.
Jan 20 2018
Jan 17 2018
Jan 16 2018
Jan 15 2018
I can't reproduce the issue on any of my devices. Not sure what's going on here