Having the ability to use buttons to increase/decrease volume would also be extremely helpful for my workflow. I'm using a nanokontrol2 to control my softsynths, but I'm also routing it to Mixing Station through MIDIOX/loopMIDI. All my sliders/knobs are used up by softsynths, but I have 8x3 buttons available to me for use in Mixing Station (R,S,M). I have successfully set "R" to Mute/UnMute channels in Mixing Station, but I'd love to be able to use the "Solo" buttons for "increase volume .5db", and "Mute" buttons for "decrease volume .5db".

Fixed in ios beta, desktop and the new "Mixing Station" android app.

Better, but change to a scene that has assigned colors, and then change to a scene that doesn't, so all inputs are default green, and the assigned colors remain.
Disconnect/ reconnect, and they come up correctly.
I'm not sure a fix is possible. Maybe a refresh scene button?

It was a bit more tricky since the SQ does send the color "black" when the default color hasn't been changed but it's fixed now

Error was "No settings uploaded, use the application to upload settings."

Ah yes that could be because of how the sq stereo/mono and mixer configuration works. I'll take a look at the SoF action, maybe it's a simple fix.

Hmm. I don't see a file upload here any more, and repeated attempts to use the Community upload failed.

Interesting data point. I loaded an old template I made when I was about to mix on my first SQ. I had included buttons for 12 Mixes and 12 groups, along with the usual 4 FX and 3 matrices, because I didn't know how the mixer might be configured. It works, sort of. Mixes 1-8 select the same mixes as the SOFList item. Mixes 9-12 do nothing. Groups 1-4 also work correctly, and 5-12 do nothing. FX and matrices also work, except the buttons say [sofname]. Here's where it gets odd. If I edit open the FX 1 button, it says it's using S0F 25. If I click on that, "Off" is highlighted. Close the picker window, and now it's using S0F 0. Close the editor, and the button doesn't work.

Yes that would be possible

or change the default to green, since inputs are the most common?

Can you pick up the kind of channel, and assign the correct default?

Yes this is due to how the SQ works. If you never changed a color of a channel the scene won't contain any color at all for the channel, thus mixing station defaults to black.

Isn't the scribble strip color a defaults issue, not a mixer issue?

oops, duplicate

Hello David and thank you for that hint !!
yes it worked !! and I am happy
I had to go down to 0,7 to get the same look as on my iPad...
so all is fine !!
thanks and friendly greetings; cheers, Sig

You can adjust the font size in the global app settings by changing the scale. Let me know if this helps

resolved

resolved

Started over, fresh layout. Mixing Station 1.0.4(119)
Add a button with action SoF 1, labeled
Mix 1
[label]
[sofname]
Cloned it several times, and replaced the first label line with the name shown in the edit action picker as follows:
Group 1 with SoF 9
FxSnd 1 with SoF 13
Mtx 1 with SoF 17
Mtx 3 with SoF 19, the last entry in the picker list.
The edit action picker list matches the board configuration: 8 mixes, 4 groups, 4 FX, 3 matrices.
The Mix 1 button activates Mix 1.
The Group 1 button activates nonexistent Mix 9.
The FxSnd button activates Group 1.
The Mtx buttons activate nonexistent Groups 5 & 7.
The [label} on the buttons confirms the SoF number being set.
The [sofname] displayed on the button matches the incorrect activations.
Also confirmed in the old SoF picker, which works correctly, and on the mixer.
Layout attached.

Can't reproduce.