Thu, Jan 16
Wed, Jan 15
Sat, Jan 11
Update: The issue is the sync, the values update correctly once touched at the mixer
I could confirm the issue, all expander gains are at +5dB instead of the actual value
O.k., no problem... is not so important.... I will test, which workaround will help: Reconneting the app and/or the stick or both.... or simply do it with the mixer itself... Thanks for your efforts!
It looks like the mixer doesn't send the new information after updating the stick. Not sure what would be the best way to fix this
Fri, Jan 10
I don't think so. I just have to find some time to setup the mixer with stageboxes to fully test it
Is there something else I can try to help you troubleshoot this?
Thu, Jan 9
That's correct, the mixer does just hide the last digit but the resolution is the same
Wed, Jan 1
ah yes I just thought the issue might happen if the extender is directly connected to the dSnake port.
On the gld it should work fine
I forgot, Qu doesn’t have an Extender port like GLD. AB168 or AR2412 work normally on DSnake port. I'll check the AB168 on my GLD Extender port when I get the chance.
Sat, Dec 28
Dec 23 2019
Interesting question. I'll have those components together on New Year's Eve. I'll try to remember to check.
Do you know if this also happens when the extender is directly connected to the mixer?
Dec 22 2019
Support via mail
Dec 17 2019
Yes, same for me! Need the pink noise often, when calibrating the PA in new rooms. Could be nice to do this from the app and not always to have to walk back to the mixer. Especially beacause the pink noise is so irritating to all other people, which must here it, so I would like to have this period as short as possible. So it could be fine to do this from the app...
Dec 8 2019
Ist erledigt, Danke! Kann es nur nicht als resolved umwandeln oder aus der "open" list raus holen...
Tried it again yesterday with last Beta 1.0.11(115): The list of recorded multitrackstracks still synchronizes not until the app will be startet new. I did 3 multitrack records. After deleting this records from the USB-stick they are still shown in the list of the app. After deconnecting and reconnecting the list is empty... o.k., no big problem, but isn't it possible to synchronize while running app? For example every time, when opening the USB-Drive-window or the multitrack-window?
Dec 6 2019
Dec 3 2019
Windows 7 is not supported - I'll provide a workaround to make it run anyways
I must admit I hadn't had that much time yet to check in detail.
I have a qu16 in my office for testing :)
Dec 2 2019
Dec 1 2019
Fixed in todays update
Which version was that on?
So far I can only reproduce that the padded gains are not shown correctly in the mixer view
Nov 28 2019
Nov 25 2019
Nov 20 2019
Nov 19 2019
Nov 16 2019
So for each mixer configuration of groups, mix mode or group mode, I would have to make a new layout? That seems less than optimal, especially considering that I expect to walk up to a Qu I've never seen, log in, and see what's going on. The A&H app can figure it out without help, so the information must be there.
if you want i can send you my "layouts.layouts".
The "on" toggles, i have creat a separets buttons for each tracks