Page MenuHomePhabricator

Manual
Updated 1,345 Days AgoPublic

Version 4 of 18: You are viewing an older version of this document, as it appeared on Oct 13 2015, 8:10 PM.

Content

This manual should give you an overview of the functions of mixing station and how to use them.

Note: This manual is not yet complete, I'm currently working on it!

About

Mixing Station is an Android app to remote control compatible digital mixers
The project started October 2013 and all development is done by one person in his freetime.
Also I want to thank everyone who helped with beta testing, new feature ideas and general feedback!
Compatible Mixer

AppConsolesMinimum firmware
XM32X32, X32 Producer, X32 Compact, X32 Rack, X32 Core, M32, M32R, M32C1.15
QUQu16, Qu24, Qu32, QuPac1.7

Quick Start

To connect Mixing Station to an console, a Wi-Fi router is required. There are many ways to setup a network so the following guide is only one of many solutions.

  1. Open the configuration page of the Wi-Fi router and activate the DHCP server. Write down the start IP address of the DHCP range, we will need that later.
  2. Change the IP address of the console to be below the DHCP address range. Example:

Router

  • IP Router: 192.168.1.1
  • DHCP-Range: 192.168.1.20 – 192.168.1.200

Console

  • IP: 192.168.1. X (X must be less than 20 and more than 1)
  • Subnet Mask: 255.255.255.0
  • Gateway: 192.168.1.1 (IP of the Wi-Fi router)
  1. Connect the Wi-Fi router to the Console via an Ethernet cable. If your Wi-Fi router has a “Wan” port make sure not to use it.
  2. Connect your android device to the wifi network.
  3. Open Mixing Station and press “Search”. After 1-10 seconds a new entry should appear with the console name and IP. Click on it to connect.
  4. If no console is found try to enter the IP address of it in the “IP” field and press “Connect”.
  5. If you got trouble setting up your network see “FAQ”.

UI Elements

Knob

The knob is used by dragging your finger into any direction.
The image above shows the different axis and their influence on the current value. A combination of two axis is possible: A drag to the top right corner increases the value faster than dragging only to the right.

Touch and hold the knob to get a horizontal fader popup for more precise value changes. The popup will only open if the value of the knob has not been changed by a drag since touching it.
Double tap on the knob to reset the value.

Fader


The fader is used by dragging the white knob to the top or bottom. If the “Fine Mode” is enabled it is possible to start dragging at any position.

Horizontal fader and GEQ fader only: Double tap on a fader resets its value to the default.

Depending on the accuracy of the touchscreen a small value jump might occur when starting dragging the fader knob.

Last Author
david
Last Edited
Oct 13 2015, 8:10 PM

Event Timeline

david created this document.Oct 13 2015, 8:02 PM
david edited the content of this document. (Show Details)
david edited the content of this document. (Show Details)Oct 13 2015, 8:08 PM
david edited the content of this document. (Show Details)
david edited the content of this document. (Show Details)
david edited the content of this document. (Show Details)Nov 1 2015, 4:21 PM
david edited the content of this document. (Show Details)Nov 2 2015, 11:42 AM
david edited the content of this document. (Show Details)Nov 3 2015, 6:45 AM
david edited the content of this document. (Show Details)Nov 3 2015, 1:32 PM
david edited the content of this document. (Show Details)Nov 3 2015, 1:41 PM
david edited the content of this document. (Show Details)Dec 27 2015, 10:39 AM
anthonym.am8 changed the visibility from "Public (No Login Required)" to "anthonym.am8 (Anthony Michael)".Apr 13 2016, 3:15 AM
anthonym.am8 changed the edit policy from "All Users" to "anthonym.am8 (Anthony Michael)".
yannik edited the content of this document. (Show Details)Apr 23 2016, 9:30 PM
david edited the content of this document. (Show Details)Apr 23 2016, 9:36 PM
david edited the content of this document. (Show Details)Jan 8 2018, 11:11 AM
david edited the content of this document. (Show Details)Feb 6 2018, 6:36 PM
david edited the content of this document. (Show Details)May 10 2018, 4:51 PM
david edited the content of this document. (Show Details)Sep 14 2018, 2:14 PM
david edited the content of this document. (Show Details)Oct 16 2018, 9:43 AM
david edited the content of this document. (Show Details)